Features

• Display module (DM)
• Interface board available in 2 versions (CB, CB12) depending on customer optional equipment.
• Option 3 module, option 4 module and option 5 module (OPT 34)
• Block building system enabling multiple combinations. Note: DM required in all combinations

Display module

• LCD screen, 8 lines 21 characters, built-in back-light and keyboard adjustable contrast
• 28 momentary push buttons (two types; 10 and 13 dia.)
• 15 display LEDs (alarms/warnings, faults/shutdowns, status, operating modes)
• UL approved polycarbonate case supplied with cable and connector for connection to the interface board
• Dimensions 192x144x70
• Quick installation using brackets and nuts screws
• IP65 on panel face with seal (not supplied), IP20 inside
• Extremely user friendly man-machine interface: multiple-message screens, diagnostic, genset status, ...

Interface board

• CB = Main board
• CB12 = Main board with option 1 and option 2 built in
• Electronics in a sheet steel case (base + lid)
• Dimensions : 435x263x31
• Voltage bus; alternator, mains and DC built into the printed circuit board (see paragraphs 7, 8, 9 and 13)
• 16 bit microcontroller, (Flash, RAM and EEPROM) memories, real-time clock, battery backup for time and date
• Supply from 9 to 33Volts DC and from 6Volts DC, for voltage drop at start-up
• All connections are built into the printed circuit board on both sides with full screen printing